Dual, 4A/2A, 4MHz, Step-Down DC-DC
Regulator with Dual LDO Controllers
Coincident/Ratiometric Tracking
The enable inputs in conjunction with digital soft-start
and soft-stop provide coincident/ratiometric tracking.
Track an output voltage by connecting a resistive
divider from the output being tracked to its enable
input. For example, for V OUT2 to coincidentally track
V OUT1 , connect the same resistive divider used for
FB2, from V OUT1 to EN2 to SGND (see Figure 2).
Track ratiometrically by connecting EN_ to SGND. This
synchonizes the soft-start and soft-stop of all the regu-
lator references, and hence their respective output volt-
ages will track ratiometrically (see Figure 2).
When the MAX15022 regulators are configured as volt-
age trackers, output short-circuit fault conditions at
either master or slave output are handled carefully—nei-
ther the master nor slave output will remain energized
when the other output is shorted to ground. When the
slave is shorted and enters into hiccup mode, the mas-
ter will soft-stop. When the master is shorted and the
part enters into hiccup mode, the slave will ratiometrical-
ly soft-stop. Coming out of hiccup mode, both outputs
will soft-start coincidently or ratiometrically depending
on their initial configuration. During the thermal shut-
down or power-off when the input falls below its UVLO,
the output voltages track down depending on the
respective output capacitance and load.
See Figure 1 for a graphical representation of coinci-
dent/ratiometric tracking.
Sequencing
When sequencing, the voltage at the enable inputs
must exceed 1.225V (typ) for each PWM controller to
start (see Figure 1c).
a)
RATIOMETRIC TRACKING
b)
COINCIDENT TRACKING
c)
COINCIDENT TRACKING
V PVIN1
EN1
EN2
SEL
AVIN
V PVIN1
EN1
V OUT1
EN2
R A
V PVIN2
EN2
V OUT2
EN1
R C
OUTPUT 1 IS THE MASTER AND
OUTPUT 2 IS THE SLAVE.
V PVIN2
EN2
EN1
V OUT2
FB2
R B
R A
R B
V OUT1
FB1
R D
R C
R D
SEL
UNCONNECTED
SEL
AVIN
SEL
UNCONNECTED
OUTPUT 2 IS THE MASTER AND
OUTPUT 1 IS THE SLAVE.
OUTPUT 1 IS THE MASTER AND
OUTPUT 2 IS THE SLAVE.
OUTPUT 2 IS THE MASTER AND
OUTPUT 1 IS THE SLAVE.
Figure 2. Ratiometric Tracking and Coincident Tracking Configurations
______________________________________________________________________________________
13
相关PDF资料
MAX15025EATB+T IC GATE DRVR 2CH 16NS 10TDFN-EP
MAX15053EVKIT+ BOARD EVAL FOR MAX15053
MAX15054AUT+T IC MOSFET DVR HIGH SIDE SOT-23-6
MAX15070BEUT+T IC MOSFET DRIVER HNM LL SOT23-6
MAX15103EVKIT# EVAL KIT MAX15103
MAX1554ETA+T IC LED DVR WHITE BCKLGT 8TDFN
MAX1570ETE+ IC LED DRVR WHITE BCKLGT 16-TQFN
MAX1573ETE+ IC LED DRVR WHITE BCKLGT 16-TQFN
相关代理商/技术参数
MAX15023ETG/V+ 功能描述:DC/DC 开关控制器 4.5-28V Input Dual Out Synch Buck RoHS:否 制造商:Texas Instruments 输入电压:6 V to 100 V 开关频率: 输出电压:1.215 V to 80 V 输出电流:3.5 A 输出端数量:1 最大工作温度:+ 125 C 安装风格: 封装 / 箱体:CPAK
MAX15023ETG/V+T 功能描述:DC/DC 开关控制器 4.5-28V Input Dual Out Synch Buck RoHS:否 制造商:Texas Instruments 输入电压:6 V to 100 V 开关频率: 输出电压:1.215 V to 80 V 输出电流:3.5 A 输出端数量:1 最大工作温度:+ 125 C 安装风格: 封装 / 箱体:CPAK
MAX15023ETG+ 功能描述:DC/DC 开关控制器 4.5-28V Input Dual Out Synch Buck RoHS:否 制造商:Texas Instruments 输入电压:6 V to 100 V 开关频率: 输出电压:1.215 V to 80 V 输出电流:3.5 A 输出端数量:1 最大工作温度:+ 125 C 安装风格: 封装 / 箱体:CPAK
MAX15023ETG+ 制造商:Maxim Integrated Products 功能描述:BUCK CONTROLL SYNC 4.5~28V 24QFN 制造商:Maxim Integrated Products 功能描述:BUCK CONTROLL, SYNC, 4.5~28V, 24QFN
MAX15023ETG+T 功能描述:DC/DC 开关控制器 4.5-28V Input Dual Out Synch Buck RoHS:否 制造商:Texas Instruments 输入电压:6 V to 100 V 开关频率: 输出电压:1.215 V to 80 V 输出电流:3.5 A 输出端数量:1 最大工作温度:+ 125 C 安装风格: 封装 / 箱体:CPAK
MAX15023EVKIT+ 功能描述:电源管理IC开发工具 MAX15023 Eval Kit RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V
MAX15024AATB/V+ 制造商:Maxim Integrated Products 功能描述:- Rail/Tube
MAX15024AATB/V+T 功能描述:功率驱动器IC Single Low Side RoHS:否 制造商:Micrel 产品:MOSFET Gate Drivers 类型:Low Cost High or Low Side MOSFET Driver 上升时间: 下降时间: 电源电压-最大:30 V 电源电压-最小:2.75 V 电源电流: 最大功率耗散: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 封装:Tube